Welcome! If you’re looking for the best slide hammer bearing puller available, you’ve come to the right place. Our team has done extensive research and physically reviewed countless slide hammer bearing puller to come up with the best of the best. So if you want to know all the details, be sure to read this article till the end!

Best slide hammer bearing puller

Our Recommended Best slide hammer bearing puller Reviews

Rank No. 1
GEARWRENCH 10 Way Slide Hammer Puller Set - 41700D
  • The Gearwrench Hammer Puller Set provides a wide range of puller applications including flange type axles, oil seals, and other press fit Parts
  • Jaws can be set up for 2 or 3 jaw internal or external pulling jobs
  • 5-1/2 lb slide hammer has a 5/8-18 thread
  • Yoke fits axles with 4, 5, or 6 Studs in a circle from 4-1/2" To 5-1/2"
  • Pulls rear axle on cars and 1/2-ton trucks with flange-type axles
Rank No. 2
Orion Motor Tech Blind Hole Collet Bearing Race and Seal Puller Extractor Kit, Slide Hammer Pilot...
  • 1.16-PIECE SET: This blind bearing puller set by Orion Motor Tech includes a slide hammer, counterstay puller, spare pin bolt, 3 screw adapters, and 10 split collets to get all your work done on parts from 1/4 to 2-1/3 inch diameter (6-59 mm)
  • 2.HEAVY-DUTY CONSTRUCTION: These wheel bearing removal tools are made from AISI 1045 medium carbon steel forged and galvanized for long-term durability under even punishing use; the collets in particular are chromoly steel to handle even the most stubborn blind bearings and bushings without trouble
  • 3.WIDE APPLICATION: This internal bearing puller set's expandable collets and threaded screw adapters remove tight and jammed axles, bearings, and bushings on a wide variety of vehicles without damaging the removed parts
  • 4.EASY TO USE: For most parts, just fit the appropriate collet, lock it into the inner race, and pull the slide hammer's weight back to easily knock out the bearing or bushing; for tighter or more delicate operation, the counterstay can be slowly tightened to more carefully extract the part
  • 5.BLOW-MOLDED CASE: The custom blow-molded case keeps everything organized and easy to carry or store as needed
Rank No. 3
Powerbuilt Master Axle Puller Tool Set, Remove Car Front and Rear, Bearings and Seals, Vehicle...
  • Made to be the most reliable tools in the market today
  • Tool solutions for most all situations
  • Built to exceed tool standards
  • Removes front and rear axles, axle bearings and seals from front and rear wheel drive vehicles
  • Can also be used as a slide hammer for dent pulling and gear pulling duty
Rank No. 4
KUNTEC 9 Way Slide Hammer Puller Set 2/3 Jaw Internal External Axle Front Rear Wheel Bearing Dent...
  • FUNCTION: The 9-way slide hammer puller set with 4 lb slide hammer is designed for loosening and pulling tight parts from a vehicle, including flange-type rear axles, most front-wheel-drive hubs, pulling dents, and other press-fit parts (bearings, bushings, gears, pulleys, etc.)
  • AUTO BODY REPAIR TOOL: The slide hammer bearing puller kits are body shop tools that are used to aggressively remove tightly jammed parts or dents; slide hammers consist of a long metal shaft with an attachment point at one end, a heavyweight that slides along the shaft, and a handle with a stop on the opposite end
  • Feature: This slide hammer puller set includes 2-jaw and 3-jaw pullers for internal and external work to provide a variety of combinations to pull bearing, gears, and seals. 2 and 3-way cross blocks and cone-type puller provide the perfect jaw configuration for most jobs
  • MATERIAL: This slide hammer puller is made of ultra strong carbon steel, these components will stand up to heavy use and accidental drops
  • Package List: This slide hammer bearing puller kit includes 1x shank and T-bar assembly, 1x 4.8 lb. sliding hammer weight, 1x cross nut, 2x hub grappler adapter flanges, 1x large forcing screw, 1x cone, 1x 3-way puller head, 1x vise grip adapter with double lead thread, 1x seal hook adapter, 1x dent puller retainer, 1x self-tapping screw, 3x 5 inch (127 mm) internal and external jaw bars, 3x hex jaw nuts, 3x hex head cap screws, and 1x blow molded storage case
SaleRank No. 5
VCT Rear Axle Bearing Remover Puller Slide Hammer Set Remove Semi-Floating
  • EASY TO USE: Slide flat end of puller through center of bearing and flat against backside of bearing, then slide washer down the center of the shaft against front side of bearing and tighten the nut on smaller end of puller, then thread a slide hammer (not included) to the puller and slide hammer back and forth until the bearing comes out; The washer captures the bearing firmly to distribute the applied force over the entire bearing and prevent damage
  • Use the VCT Pneumatic SAE Standard Rear Axle Bearing Puller 3-Piece Service Set – Domestic Car Vehicle Bearings Removal Tool Kit to service semi-floating rear axle bearings on your vehicle; These tools make the job simple and prevent damage to your bearings when pulling; Much easier than claw-type axle bearing pullers that slip off and chew up the old bearings; For removal only, not intended for installation
  • FITS YOUR CAR: Standard SAE sizes work for most American domestic makes and models; Set includes the following sizes to fit main bearing tube – 1 inch to 1-7/8 inches, 1-5/16 inches to 2-3/8 inches, and 1-3/8 inches to 2-7/8 inches; Sizes permanently laser-etched on tool for easy identification; Each tool fits a basic slide hammer with a 5/8-inch x 18 thread pitch
  • EASY STORAGE: Heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization
  • PACKAGE CONTENTS: Package includes (3) rear axle bearing removers and (1) carrying case for your convenience; Slide hammer not included
Rank No. 6
DASBET 16PCS Blind Inner Bearing Puller Hole Remover Extractor Set Slide Hammer Tool Kit
  • 【Applicable】This inner bearing puller set is designed for loosening and pulling tight bearings and bushings, and fit for all vehicles 8-53MM bore bearing.
  • 【Instructions to operate】: How to use? Firstly insert the correct collet in the bore of the bearing and turn the nut to expand the collet till it is secure within the bearing; Attach the small slide hammer and yank the weight towards the handle to give an extra snap of weight; Repeat action until the bearing or bushing has been removed; U-shaped bearing seal puller can be used by threading the bushing puller onto the collet and tightening the nut to slowly pull the bearing out of place.
  • 【Usage】This slide bearing removal tool is designed to quickly finish the job without damaging the removed parts or the tool. This small bearing puller tool is ideal for professionals and do-it-yourselfs.
  • 【Sturdy Construction】: Constructed of a strong, durable carbon steel, the bearing extractor tool is sure to pull even the toughest wheel bearing and bushings from tight positions. This blind bearing puller set has a long steel rod and a T-bar handle. The flared ends of the shop hammer weight provides a sturdy grip. The forged hardened steel and rust-proof finish help to increase pulling strength and force while also providing longevity for the tool.
  • 【Easy Storage】Comes in a blow molded case for safe & easy transport and storage.
Rank No. 7
Powerbuilt Slide Hammer Puller Tool Kit, Jaw Pullers, Remove Car Seals and Bearings Set, Front and...
  • USEFUL: Removes axles, seals and bearings on front and rear wheel drive vehicles
  • EASY STORAGE AND INSTRUCTIONS: Durable storage case with step-by-step instructions
  • QUALITY BUILT: Precision-built to meet or exceed ANSI standards
  • LONG-LASTING: Strong and dependable enough to last a lifetime
  • Kit includes usage instruction with photos
SaleRank No. 8
Orion Motor Tech 9-Way Slide Hammer Puller Set, Front Wheel Hub Bearing Remover & Rear Wheel Axle...
  • VERSATILE PULLER SET: The Orion Motor Tech 9-Way Slide Hammer Puller Set with 4 lb slide hammer is ideal for a variety of pulling applications, including flange-type rear axles, most front-wheel-drive hubs, pulling dents, and other press-fit parts (bearings, bushings, gears, pulleys, etc.).
  • INTERNAL & EXTERNAL JAWS: Includes 2-jaw and 3-jaw pullers for internal and external work to provide a variety of combinations to pull bearing, gears, and seals. 2 and 3-way cross blocks and cone-type puller provide the perfect jaw configuration for most jobs.
  • ULTIMATE DURABILITY: Built to last with rugged carbon steel alloy and chrome vanadium steel components, our tool kit can withstand accidental drops and years of heavy use without cracking or rusting.
  • INSTRUCTIONS INCLUDED: To help novice DIYers get the job done right, we've included a detailed parts diagram and step-by-step instructions to simplify tough jobs like the piston wind-back process.
  • 1-YEAR WARRANTY: In order to provide a worry-free shopping experience, we promise a 1-year warranty and 100% free exchange if the product is defective. Includes a protective carrying case to extend the life of your tools.
Rank No. 9
KUNTEC 5pcs Blind Inner Bearing Puller Hole Pilot Bearing Gear Puller Slide Hammer Puller Set
  • Blind bearing puller is used to pull out evenly without damage the parts.
  • Bearing extractor collets with internal capacity from 3/8" (10mm) to 1-1/4" (32mm)
  • Easy to Use: Open the collets (clamps) by turning the T-handle clockwise until it fits snugly against the bearing, and then pull out evenly
  • Bearing puller is made of chromed carbon steel for durability, overall length 15" (382mm). Bearing Extractor Size: 1: 3/8" to 1/2" (10mm-14mm) ; 2: 9/16" to 11/16" (15mm-19mm); 3: 5/8" to 1" (18mm-25mm); 4: 1" to 1-1/4" (25mm-32mm)
  • Customer Service: If there is any other questions on this product, please contact us, we will reply in 24hours.
Rank No. 10
Orion Motor Tech Blind Hole Collet Bearing Race and Seal Puller Extractor Kit, Slide Hammer Pilot...
  • 16-PIECE SET: This blind bearing puller set by Orion Motor Tech includes a slide hammer, counterstay puller, spare pin bolt, 3 screw adapters, and 10 split collets to get all your work done on parts from 1/4 to 2-1/3 inch diameter (6-59 mm)
  • HEAVY-DUTY CONSTRUCTION: These wheel bearing removal tools are made from AISI 1045 medium carbon steel forged and galvanized for long-term durability under even punishing use; the collets in particular are chromoly steel to handle even the most stubborn blind bearings and bushings without trouble
  • WIDE APPLICATION: This internal bearing puller set's expandable collets and threaded screw adapters remove tight and jammed axles, bearings, and bushings on a wide variety of vehicles without damaging the removed parts
  • EASY TO USE: For most parts, just fit the appropriate collet, lock it into the inner race, and pull the slide hammer's weight back to easily knock out the bearing or bushing; for tighter or more delicate operation, the counterstay can be slowly tightened to more carefully extract the part
  • BLOW-MOLDED CASE: The custom blow-molded case keeps everything organized and easy to carry or store as needed
Rank No. 11
DeShan 9PCS Rear Axle Bearing Puller Tool Kit and Slide Hammer Set with Slide Hammer Yoke and 3 Rear...
  • INCLUDES: Professional Rear Axle Bearing Puller Tool Kit and Slide Hammer Set Provides 5/8" Slide Hammer, Yoke, Lock Nut, Hook and Adapter
  • HIGH QUALITY: Multifunctional Slide Hammer Puller Set is made of 45# Structural Steel with excellent strength and durability, giving you better performance, strength and longevity
  • AXLE PULLER SET&SEAL PULLER SET: Lock the slide hammer onto the 4-point yoke to set up a flange type axle puller that will let you extract parts with threaded holes, including stud axles, spur gears, and more. The 5.5 pound slide hammer and its sturdy T handle provide the firm grip and torque needed to pop out worn and damaged seals and other press fit parts using the included hook
  • BEARING PULLER SET: The small, medium, and large bearing puller adapters cover inner diameters from 1 to 1-7/8", 1-5/16" to 2-3/8", and 1-3/8" to 2-7/8" respectively to remove semi-floating rear axle bearings
  • AFTER-SALES SERVICE:If the product has any quality problems, We provide free return&exchange service. you could contact our customer service, we will give you an exact answer within 24h.
Rank No. 12
ATPEAM 9-Way Slide Hammer Puller Set | Wrench Adapter Axle Bearing Hub Auto Set, Axle Front Rear...
  • Extra Durable: The ATPEAM slide hammer puller set is made of drop forged steel pullers and fully hardened shaft and accessories, this will pull the hardest wheel bearing and wheel hub out of the tight position, and make sure this tool set a longer lifespan.
  • A Complete Puller Set: 1x shank and T-bar assembly, 1x 4.8 lb. sliding hammer weight, 1x cross nut, 2x hub grappler adapter flanges, 1x large forcing screw, 1x cone, 1x 3-way puller head, 1x vise grip adapter with double lead thread, 1x seal hook adapter, 1x dent puller retainer, 1x self-tapping screw, 3x 5 inch (127 mm) internal and external jaw bars, 3x hex jaw nuts, 3x hex head cap screws, and 1x blow molded storage case.
  • Auto Body Repair Tool Set: The slide hammer bearing puller kits are body shop tools that are used to aggressively remove tightly jammed parts or dents; slide hammers consist of a long metal shaft with an attachment point at one end, a heavyweight that slides along the shaft, and a handle with a stop on the opposite end; this hammer tool slide kit includes 2 jaws and 3 jaw internal and external pullers, rear axle bearing puller tool, locking plier adaptor, puller hook, and auto dent puller tool
  • Wide Application: The 9-way slide hammer puller set with 4.8 lb slide hammer is ideal for a variety of pulling applications, including flange-type rear axles, most front-wheel-drive hubs, pulling dents, and other press-fit parts (bearings, bushings, gears, pulleys, etc.).
  • Blow Mold Case: This bushing removal tool is packed in a heavy-duty, blow-molded case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the tool set.
Rank No. 13
OEMTOOLS 27032 Flange-Type Axle Puller, Rear Wheel Bearing Removal Tool, For Use with a 5/8" x 18...
  • PULL THROUGH: This hub removal tool is designed for use with the OEMTOOLS 27033 Slide Hammer or any other slide hammer threaded 5/8" x 18 to pull rear wheel flange type axles out; Thread the puller and slide hammer into the hub and pull until free
  • WORKS WITH MANY VEHICLES: This axle removal tool works on a wide range of vehicles with flange type axles that have 4, 5, or 6 studs and a bolt circle range between 4-1/2" and 5-1/2"; This puller threads into the hub underneath the tire and rotor
  • SAVE TIME AND HASSLE: This rear hub puller, when used with a slide hammer, is a quick and easy way to pull out the axle; Avoid taking a conventional hammer to the wheel parts and chancing mistakes; Deliver the force you need with precision instead
  • COMPLETE THE SET: The same Slide Hammer is also used with the OEMTOOLS 27058 FWD Inner CV Joint Puller, OEMTOOLS 27059 Pilot Bearing Puller, OEMTOOLS 27104 4WD Spindle Puller, OEMTOOLS 27129 Rear Axle Bearing Puller and OEMTOOLS 27184 2/3 Jaw Puller
  • PRODUCT SPECIFICATIONS: Designed for slide hammers threaded 5/8" x 18; Works with flange type axles that have 4, 5, or 6 studs; Bolt Circle Range is from 4-1/2" to 5-1/2"
Rank No. 14
Slide Hammer, Orion Motor Tech 9-Way Internal/External Slide Hammer Puller Set - Pulls Hubs, Rear...
  • VERSATILE PULLER SET: The Orion Motor Tech 9-Way Slide Hammer Puller Set with 5 lb slide hammer is ideal for many pulling applications like flange-type rear axles, most front-wheel drive hubs, pulling dents, and other press-fit parts (bearings, bushings, gears, pulleys, etc.).
  • INTERNAL & EXTERNAL JAWS: Includes 2-jaw and 3-jaw pullers for internal and external work to provide a variety of combinations to pull bearing, gears, and seals. 2 and 3-way cross blocks and cone-type puller provide the perfect jaw configuration for most jobs.
  • MULTI-FUNCTION: Includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling requirements. All the tools are contained in a heavy-duty organizer case to extend the life of your tools.
  • ULTIMATE DURABILITY: Built to last with rugged carbon steel alloy and chrome vanadium steel components, our tool kit can withstand accidental drops and years of heavy use without cracking or rusting.
  • ALL-IN-ONE TOOL SET: Complete 15 piece set for a wide range of pulling applications, including: Slide Hammer, Puller Head, Pulling Adapter, Cross Block, Internal/External Puller Jaw, Hex Jaw Nuts & Screws (3), Vise-Grip Adapter (single-lead thread), Seal Hook, 3-Way Puller Head, Cone, Self-Tapping Screw and Retainer.

We created this article in hopes that you would be able to find the best waterproof case for samsung note 20 ultra to suit your needs. We hope that we were able to succeed in our mission to help you out.

If you’re looking for a cheap waterproof case for samsung note 20 ultra, keep in mind that you’ll get what you pay for. That being said, don’t forget to share this article with your friends and keep checking back for more informative articles and reviews.

Leave a Reply

Your email address will not be published. Required fields are marked *